Yaesu FT-817ND with MacMemoriesManager

I had been playing with my Yaesu FT-817ND for a while, but not really using it very much on VHF/UHF, primarily because I hadn’t programmed very many of the local repeaters in to it.  As with any radio, I really dislike programming a lot of memories in to them via their on device programming methods (tiny buttons, little knobs, one digit at a time, etc)

On my Mac, for my Kenwood radios I have been a very happy customer of MacMemoriesManager for a number of years. “What?” you say? A Mac?  I thought this guy was a ham radio operator?  We all know Hams use Windows (preferably Windows 3.1 or Windows 98 right?) or Linux!

Well, the Macintosh platform is continuing (although slowly) to grow for amateur radio, I really thank those Mac developers, I know they would sell more software if they sold to the larger community, but with the high quality designs Apple has been putting out over the last few years, more and more hams will be switching, especially as quality software is available for them.

Okay, enough of me praising Apple, back to what I was talking about.  So I wanted to start programming frequencies to the FT-817, so I headed over to eBay and found a USB data  cable for it from 409Shop.com who goes by the name RadioFactory on eBay.

ft-817_usb_cable

I received the cable and a small cd with drivers on it. I never opened the driver CD as I’m sure it was Windows only, and those tiny CD’s won’t work safely in slot loading cd players I don’t think. Didn’t need it anyways, I already had my USB driver installed since I use similar cables for my Kenwood radios.

These cables use the pl2303 Serial to USB chip, and that led me to the SourceForge project: PL2303 USB to Serial Driver for Mac OS X. I have noticed that Apple has a link to that same SourceForge project as well.

  • 2023 Note: For newer M1 MacBook Pros running Sonoma and needing a Prolific PL2303 Serial Driver, it looks like this works: Prolific V.2.2.2

So I connected up the radio and the cable and fired up MacMemoriesManager… and nothing happened. I’ve been consistently frustrated by the 817 since it seems so foreign to the way the Kenwoods work… somehow the Kenwoods just make more sense to me. As I use the 817 more I’m sure I will get used to it.  But here were the major hurdles I was experiencing while trying to load memories:

First, it kept saying the radio couldn’t be found. Apparently the radio has to be in VFO mode, not memory mode to be programmed.

Second, I got it to connect, but only about one in five of the memory channels would get programmed successfully, garbage data was being written to the file, sounded like a baud rate issue.  I reduced the baud rate to 4800 in MacMemoriesManager, and also reduced the rate on the radio and data started flowing perfectly!

To change the baud rate on the radio, turn the radio on, push and hold the “F” key, navigate to menu item 14 using the SEL knob, then choose 4800 for the rate, then push “F” again to get back to your regular modes.

One of the things I really like about using MacMemoriesManager is that since I already had all of my frequencies programmed for the Kenwoods, I was able to open up that memory file, switch the radio to use in the software, and then send those frequencies right back in to the 817 so frequencies can match across all three of my radios and I never had to type them back in again.

Only downside was… the 817 doesn’t receive 220 MHz, and won’t receive the fire department frequencies I use most often, so I had to delete all of the frequencies from the memories that were outside the receiving range of the 817. A wider band receive sure would have been nice for this, I guess I’m just spoiled by my Kenwood TH-F6A!

New Kenwood TH-F6A Handheld

Kenwood TH-F6AAfter quite a bit of reading reviews and looking through catalogs, and viewing the TH-F6A Instruction Manual, I finally settled on the Kenwood TH-F6A as my next radio. Well, actually, it’s “Ellen’s Radio” (KI6FEB) but she and I both know I’ll play with it a lot more often!

Since we only had my one radio, the Kenwood TH-D7, we never have talked to each other on the air, and I really wanted to get at least a basic setup going for emergency communications. I would like her to have a radio in her car so that if the big earthquake happens, at least we’ll have a chance of using radio to communicate.

So far I’ve been really impressed by it, very small size, I can tell it is well built, audio quality seems very good, and I haven’t been on the air with it yet but that will come soon enough.

One thing I really liked about having another Kenwood is I was easily able to transfer the memories from my TH-D7 to the TH-F6 with little trouble! For the D7, I’d been using a Keyspan USA-19HS to USB port, and connecting the Kenwood Data Cable to the radio. I was using MacMemoriesManager on Mac OS X with my 12″ Powerbook. Before I even got my F6 I ordered a USB Programming cable for it from an eBay store called qMall.

I knew there were no Mac drivers supplied with it… but I had faith, and my faith was rewarded with a quick search online. I quickly discovered the cable used the pl2303 Serial to USB chip, and that led me to the SourceForge project: PL2303 USB to Serial Driver for Mac OS X. I have noticed that Apple has a link to that same SourceForge project as well.

[2016 Update: Try this for PL2303 Mac OS X Driver Downloads for El Capitan, Yosemite, and Mavericks]

I struggled a bit, it was appearing that MacMemoriesManager couldn’t communicate with the radio. Of course I don’t ever read the manuals, so I struggled for a bit trying various options, baud rates, ports, etc until finally I wandered through the menu and found the secret option. Since the TH-F6A doesn’t have a separate PC port, they use Menu Number 9 “SP/MIC JACK” to determine the SP/MIC jack function. It includes the options of SP/MIC, TNC, and PC. I flipped that to PC and the frequencies started copying right away.

I was able to copy all of the D7 frequencies to it, and over the next days I’ll figure out how I want to organize all of the frequencies in to different groups and such. It’s great having the wider receive range, I can pick up AM broadcast, CB Radio, TV stations, all of the aviation band, etc. That was one reason I chose it, I won’t have to carry my Uniden Bearcat 200XLT scanner as often anymore.

Save